cds-logo-v2
  • About
  • Solutions
    • Curing
    • AirTek
    • Drying
    • Kilns & Furnaces
    • R-O2
    • Controls
    • Biocarbon
    • Energy Reduction Solutions
    • Pre-Engineering Solutions
    • Turnkey Solutions
  • News
  • Services & Spares
  • Trade Shows
  • Contact Us

+44 1782 336 666

info@cds-group.co.uk

What Temperature Range Do You Need from an Industrial Kiln?

What Temperature Range Do You Need from an Industrial Kiln?

by lucy_cobalt | Oct 20, 2026 | News

Ask a manufacturer for a kiln quote before you have settled on a firing temperature, and you will probably get a polite question back. At CDS Group, the temperature range is one of the first things our engineers want to know, because it shapes almost every other...
Low Pressure Hot Water Systems – How They Work and When to Use Them

Low Pressure Hot Water Systems – How They Work and When to Use Them

by lucy_cobalt | Oct 2, 2026 | News

Concrete does not simply dry out and harden, it cures, and that depends on holding the right moisture and temperature while the cement hydrates. CDS Group designs the heating side of that process, and low pressure hot water, often shortened to LPHW, is one of the most...
What’s the Difference Between Drying Ovens and Curing Ovens?

What’s the Difference Between Drying Ovens and Curing Ovens?

by lucy_cobalt | Sep 4, 2026 | News

Drying ovens and curing ovens get treated as though they’re interchangeable, and on the surface, that confusion makes sense. Both use controlled heat, both look broadly similar from the outside, and both play an essential role somewhere in most manufacturing...
Envirocure Big Room System Successfully Delivered to Builders Supply in Fort Payne, Alabama

Envirocure Big Room System Successfully Delivered to Builders Supply in Fort Payne, Alabama

by joe_cds | Aug 10, 2026 | News

CDS Group has successfully completed the delivery of a major Envirocure Big Room curing installation for Builders Supply in Fort Payne, Alabama, supporting the commissioning of a new high-capacity concrete block manufacturing facility.   From the earliest design...
When to Repair and When to Replace Thermal Processing Equipment

When to Repair and When to Replace Thermal Processing Equipment

by lucy_cobalt | Aug 4, 2026 | News

There comes a point in the life of most thermal processing equipment when something goes wrong, and the question that follows is rarely straightforward: do you fix it, or do you replace it? The honest answer is that it depends, and the factors worth weighing are more...
CDS Group Supplies Large Composites Curing Oven to University of Sheffield AMRC

CDS Group Supplies Large Composites Curing Oven to University of Sheffield AMRC

by joe_cds | Jul 29, 2026 | News

CDS Group Supplies Large Composites Curing Oven to University of Sheffield AMRC   CDS Group is proud to have supplied a large composites curing oven to the University of Sheffield Advanced Manufacturing Research Centre (AMRC). The equipment supports the AMRC’s...
« Older Entries

Recent Posts

  • What Temperature Range Do You Need from an Industrial Kiln?
  • Low Pressure Hot Water Systems – How They Work and When to Use Them
  • The Difference Between an Oven, a Furnace and a Kiln and How Each Works
  • What’s the Difference Between Drying Ovens and Curing Ovens?
  • Autoclaves Explained: What They Do and Why Many Manufacturers Rely on Them

Recent Comments

No comments to show.
logo-lg
Download the Brochure

Quick Links

  • CDS Group
  • CDS Curing
  • CDS Drying
  • CDS R-O2
  • CDS AirTek
  • Kilns & Furnaces
  • CDS Controls
  • Industries
  • About
  • News
CDS Group meets ISOQAR 14001 and UKAS Standards
CDS Group meets ISOQAR 14001 and UKAS Standards
CDS Group is Cyber Essential Certified.
  • Follow
  • Follow
  • Follow
Copyright © 2026 CDS Group

Privacy & Cookie Policy | Terms & Conditions

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.